Hey guys, I just replaced the chain in my daughters' t-case. It was grinding and the chain was real sloppy. I got it back together and it still grinds. When it is put into 4wd high or low the transfer case grinds and does not engage the front drive shaft. It seems as the fork is not moving enough. After looking at diagrams better I do not recall seeing any shift fork pads (#44 in this picture: http://www.tbtrans.com/id22.htm#np231). Could that be what is going on?

Never mind. The mode fork is worn. The way it wore made it look like it was machined like that.