For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
mopartechnician 1 post
chrisrmerritt 1 post
Ok so I replaced my contacts in my starter a week ago when my truck wouldn't start that fixed that issue! Now tonight I went out to start it and I noticed that mt lift pump ran for only 3 to 5 seconds and then I waited for the
to go out and it just cranks, and I get no codes. So I turned the key to the "off" position and then turned the key to the "on" position and this time the lift pump ran like it's supposed to for about 20 to 25 seconds, and the 
came back on and I waited for it to go out and tryed it again still just cranks with no codes
. Now iv'e only had the truck a year, and replaced the fuel filter twice and each time I bumped it like required but I had to crack the fuel lines to get the air out of the system to keep her running. Thought maybe this might be related to the issue Im having. As far as fuel pressure goes I dont have a fuel pressure guage yet so I have no idea what that is
. Maybe my lift pump craped out on me? Is there a way I can test the fuel pressure coming into and out of the fuel canister, and the fuel going into the VP 44? If so how? Thanks in advance to everyone that shares there knowledge!!in helping me figure this out much appecaited!!!
