Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Manual fuel shut down cable install

Dieselpwrram
 Share

Recommended Posts

Dieselpwrram

Dieselpwrram

Posted
Posted

My fuel shutdown/start cable setup. The photos show where I used the old solenoid to actuate the fuel shut off and location or the cable control into the cab. The setup is pretty straight forward. I left the spring inside the boot. This will allow the fuel lever to snap shut when the cable handle is released.

Posted Image

Posted Image

Posted Image

Posted Image

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...