Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

intermittent miss on 3 different trucks

lcmartin
 Share

Recommended Posts

Timbo

Timbo

Posted
Posted

What I do is get this extension harness.http://www.wbodystore.com/IAT-Extension-Harness-p-65.html I then use a 1k resistor inline with the switch to just jump across the 2 wires.This way when the switch is flipped one way, that circuit is open and the ecm is reading actual iat temp. When you flip it the other way it adds the 1k across the two wires lowering the total resistence thus the ecm thinks its hot and pulls timing out. In cold weather, it starts much easier when the ecm gets the actual iat reading to advance timing for cold start.

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...