Transmission & Transfer Case
Everything pertaining to transmissions and transfer cases. This includes automatic transmissions and manual transmissions.
3 Cummins articles in this category
-
Will add pics to steps shortly. This covers the 47 and 48 RE transmissions but there is evidence that it is used on other years / types of Chrysler products. Procedure should be similar for the other automatics used in the 2500 3500 line of trucks. OK, changed out the Neutral Safety Switch, AKA transmission range sensor last night. Easy job, but messy as all get out. You'll need a drain pan, 1/4 drive ratchet, 6" extension ( 4" would probably work ), small TORX bits ( forgot to check
- 0 comments
- 5,900 views
-
To change the T-case fluid is really easy. i went shopping and picked up 3 quarts of Valvoline transfer case fluid. i know the manual calls for ATF+4 but well i didn't listen. ***NOTE*** ALWAYS remove the fill bolt first. it's a Allen wrench of size that eludes my thoughts right now. All to often i've seen people drain the t-case first then can't get the fill bolt out. now after that's been removed, you can safely remove the drain bolt and drain the t-case. i put a larger red fun
- 0 comments
- 5,329 views
-
I took some pics as I did mine last week, and thought I'd try making a write up on it. Basic tools etc. you'll need are , approx. 8qts. of ATF+4/filter,Governor press. solenoid and transducer,1/4' drive torque wrench, 1/4" & 3/8" socket sets, basic metric wrench set, a pick or small screwdriver, a drill with a 1/2" bit for the drain plug kit, big catch pan:thumbup2:, and a paint pen or sharpie,plus whatever I forgot:ashamed: 1) Drop pan to drain the fluid, the easiest way is to go
- 0 comments
- 6,011 views
Ads
-
Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
- Price: 16000
- Location: Chico CA 95973
- 0 comments
- 194 views
-
For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
- Price: $1,000.00
- Location: New Meadows, Idaho
- 0 comments
- 1,264 views