Jump to content
Posted

Hello all. New to the site and thankful for finding a bunch of likeminded people. This is my 5th Cummins it’s a 2002 6spd 2500 longbox 4wd. About to turn over 500,000 kms (Canada).

 

Love it and it does everything I need it to but recently I’ve been noticing what feels like an awful lot of axle wrap while towing. I got to tearing into it yesterday and found a couple loose u bolts but worse is that the factory lift blocks under the leaf packs seem to be walking off the axle perch. 

 

It it must have been happening for a bit because both the block and the perch are misformed now. My question is do I buy a new lift block and hope for the best or eliminate them all together with just spring or even better I’ve been told to get a shackle flip kit.

 

The pics are just of the left he left side as it was the worst and the only side I found loose u-bolts on. But the right side looks as if it’s moving too. Any input would be appreciated. 

39083031-0131-4F01-AA95-9D7AF1339ACE.jpeg

9CCC4A37-A8A5-439B-ABA1-D2453EC57313.jpeg

  • Replies 7
  • Views 1.5k
  • Created
  • Last Reply

Top Posters In This Topic

Posted Images

Featured Replies

  • Author

Thanks for the input. I guess with that kind of mileage and lots of hauling over it’s life time those springs are needing some work. I will look into that. 

  • Owner
2 hours ago, Felske said:

About to turn over 500,000 kms

 

Ok... So that 310,685 miles. I'm about to turn 345k miles which is about 555,223 km... Time to catch up. :tongue: These engines are good for at least 1,609,344 km (1 million miles). I'm also a towing guy too. I've got a utility trailer I haul firewood with and then my 31 foot Jayco RV. Which now is set up as a second home. I travel about 60k miles per year (96,560 km).

 

The best suggestion I've got since we both work these truck hard. Is to get on a creeper and roll from front to rear with a flashlight or drop light and inspect everything you can. Anything that is out of place or showing damage its time to take the time and repair it.

 

20180523_212139.jpg

 

 

  • Author
9 minutes ago, Mopar1973Man said:

 

9 minutes ago, Mopar1973Man said:

 

 

 

 

 

 

Even the same colour ? really can’t beat these rigs for what they do. But yes maintenance is the key. I think I’m going to go with new leaf packs in the back and retire the wore out stock stuff. 

A8696DA9-72FC-493A-AAF7-1727230798F3.jpeg

  • Owner
2 minutes ago, Felske said:

Even the same colour ? really can’t beat these rigs for what they do. But yes maintenance is the key. I think I’m going to go with new leaf packs in the back and retire the wore out stock stuff. 

A8696DA9-72FC-493A-AAF7-1727230798F3.jpeg

 

Copy Cat... Stainless Steel rockers...:poke: Your paint job looks 100 times better than mine with all the little rock chips in it. 

20180519_140459_HDR.jpg

 

2 hours ago, Felske said:

Even the same colour ? really can’t beat these rigs for what they do. But yes maintenance is the key. I think I’m going to go with new leaf packs in the back and retire the wore out stock stuff. 

A8696DA9-72FC-493A-AAF7-1727230798F3.jpeg

Sharp rig! I like the headache rack and bed rails. :thumb1:

  • Author
11 minutes ago, Dmaney said:

Sharp rig! I like the headache rack and bed rails. :thumb1:

Thanks man I actually just had to remove those to start hauling a fifth wheel trailer I bought