Hey,

So I bought a 3M headlight restore kit a while back and decided to give it a try. This was done a little while back, but I'm just now getting around to posting it up!! I was really impressed with the results!!!:blues:

Here are some pictures:

The kit!

Don't you like my custom tool box!!

Tools needed: A drill, spray water bottle, and shop towels help!

The passenger side is done, the driver's is about ready to be started!

Before!

First step!

During the step!

Second step!

During the step!

Third step!

During the step!

Fourth step!!!

Use this on the last step!

Water bottle needed!

After!!!

Done!!

Done!!

That's pretty much it. It didn't take long and the instructions are easy to follow. Make sure you use the provided masking tape to tape off anything you don't want sanded!! They gave me plenty for what I was doing and I even used two layers on mine so I don't think you'll have a problem. Of course you can always buy a roll when you pick up the kit at the parts house!!:thumbsup:

If you have any questions, just let me know as usual!!:blues:

Thanks,

Winslow

Are you sure you didn't just put in new fog lights and are a 3M representative? :lol:Very nice job! I need to do that to my headlights, I notice yours are crystal clear. Probably make my headlights actually emit light too.

Are you sure you didn't just put in new fog lights and are a 3M representative? Very nice job! I need to do that to my headlights, I notice yours are crystal clear. Probably make my headlights actually emit light too.

Hey, No, I'm not a rep, but I probably should be!!!! The headlights are pretty new. They are a sport light conversion from DieselAutoPower.com with new harnesses that came with them!! Thanks, Winslow