Posted March 6, 20196 yr Ight guys I have a 2002 dodge 3500 6 speed. I've done changed the tps 3 different times. All three of them show 0.05v at idle and as soon as I try and adjust it it jumps up too 4.38v. Anyone else run into this problem? Edited March 6, 20196 yr by Brenton435
March 6, 20196 yr Owner What error codes do you see? Did you ohm out your wiring? Did you check for 5V signal from the ECM?
March 6, 20196 yr Author What wire needs to be checked at the ecm? These are my codes. I just replaced the vp44 and throttle position sensor but havent cleared the codes out. Ppcu P1693 Pecu P1698 P0341 P0370 P0230 P0113 P0122 P1689 P0577
March 6, 20196 yr Owner 35 minutes ago, Brenton435 said: Yeah man trucks been a headache sense I've gotten it. Go through the pages I've linked to and do the diagnostics and clean up the issues.
March 7, 20196 yr Author Ok so I've str Armed doing some reading and I think I've been probing the wrong wire the whole time.... dummy me right. So just be sure what wire needs to be probed?
March 7, 20196 yr Owner All the wire maps... https://mopar1973man.com/cummins/articles.html/24-valve-2nd-generation_50/51_engine/electrical/
Ight guys I have a 2002 dodge 3500 6 speed. I've done changed the tps 3 different times. All three of them show 0.05v at idle and as soon as I try and adjust it it jumps up too 4.38v. Anyone else run into this problem?
Edited by Brenton435