For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
We've got a 2008 MCSB 6.7L G56 with electric tcase. We had tons of issues with the 4WD over the past couple years with the transfer case shifting. After a few replaced decoder motor replacements, I said 'eff it' and swapped the 273 for a 271 from an 07 model. I put the floor shifter in, linkage, etc. 4WD works flawless now, and have had zero issues, since..
With the exception of the SERV 4WD light on (for obvious reasons). This has been the case since day 1 of the swap. So I thought "what if I just stick the motor from the original 273 under there, tie it up, and plug it in?" Nope. Still on. No Codes on my scanner to clear, so IDK what's happening.
Anyone done this swap/heard of this issue, or a fix? I can't seem to find anything on the interwebz about it.
Edited by Rogan