Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
So I did a pretty big rewiring job on my truck(wt ground mod) and I also wired in a terminal buss system so I could clean up all the wires attached to my battery cables. I ran power from the alternator lug on the pdc system to the positive wiring buss. Well, my stupid self did the crimp on the cable from the battery to the pdc wrong, and it fell apart, and killed my truck. I figured it out and fixed it, but now my quadzilla module isn't working. So I figured I could reflash the module, hoping it would work. My current problem is I can't find the flash installer on the website. I'm using Me78569's guide, but I can't even find the quad installer. I did download the V2 flash from here, and it will open up a program, and I follow the prompts, but it keeps posting this picture. Is it me doing something wrong, or? I really need this programmer working because I'm going to be pulling a camper trailer about 6 hours away here in two weeks, and the truck runs like poop right now without the programmer.
Pic attached is the error I keep getting