So Christmas eve I was forced to swap my drovers door. Seemed like an opertune time to pull the trigger on swapping to power windows.  I've been told that they are plug and play with non power trucks. I'm hoping that I just have the wrong door harness and it's a simple fix. Both door side harnesses have two plugs while my truck only has a single. I know that both donor harnesses had the premium sound system and I assume that's the extra plug. Any help would be nice. I have casually searched previous posts without any luck. 

 

Here is the wire map.

The diagram doesn't tell me if there dash harness is pre wired though.... that's where I'm confused. I've seen guys say it's plug and play to add power windows and mirrors and others say I have to add a harness and relays.

@Mopar1973Man turns out I'm missing a harness that's pretty important. Plug and play swapping power windows is a no go.....

Kind of figured. You'll need to most likely hit a salvage yard for the wiring.