Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
New here,
Swapped a 24v with a DCS standalone harness into a Land Cruiser. Fires up idles, but NO throttle. Motor was running and driving before swap.
APPS is within range,, new batteries, connectors, cables etc. but not getting a signal back to the ECM. Scanner shows ZERO through the OBDII, no change when operating the throttle.
Changed sensor .6 to 4.1V with multimeter at sensor and all other parameters are within ranges and check out.
0122 Code- Low Voltage on scanner.
Any help on this. I'm hoping the ECM is not bad.
Jason
Edited by TRAIL TAILOR