I just picked up a 95 12v as a tow rig for my pull truck. I pulled out the controler from my 2001 and thats a plug and play. I looked under the dash of the 95 and I dont see any similar looking wires.. Help pleasePosted from my mobile phone while not driving....

Awesome truck... Let me do some digging on my truck and figure out the connections for ya... I'm the same thing a plug and play cotroller... Edit: Ummm... If I'm not mistaken its 12V + GROUND Brake Pedal sense Trailer brake power You might at a peek at the wiring diagram for the 97 wiring... http://forum.mopar1973man.com/downloads.php?do=file&id=129

Thanks, I dug around under the dash and the wires under there are small guage (16) compaired to the brake controler wires (12 guage). why cant it just be simple.

Well your going to have to look at the trailer plug in back and see what wire is back there for the plug. Then your going to have to trace it forward to the cab. I'm pretty sure its there just stashed. Like I didn't know there is a stub wire in the harness down on the driver side frame for center brake light for toppers... Yeap its there you just got to know it exist... Let me dig for my wiring diagrams... http://forum.mopar1973man.com/downloads.php?do=file&id=129 Just check it shows thre trailer plug and controller plug...

I dont have much time to work on it as im working 90+ hrs a week, however i did get the KDP done last night. I saved the file on the computer and I will look it over for a next weekend project. I printed out pg 11 and 12 as thats the exteriror lighting, looks like a mess, I hate wiring....:doh:Thanks.