Posted June 16, 201213 yr I want to get some with stainless steel coating that are heat resistant [close to my twins exhaust secondary]Any idea on size (ID and OD) ?? thanks
June 17, 201213 yr Replaced my heater core lines with High temp hose & sleeved both each with a piece of heat shield. Heat shield will reflect most of the heat, cost $5 to 8 a foot. I used 3'... Dave
June 17, 201213 yr Author Replaced my heater core lines with High temp hose & sleeved both each with a piece of heat shield. Heat shield will reflect most of the heat, cost $5 to 8 a foot. I used 3'... Dave Yeah basically what I plan to do. What size or where did you get the heat resistant hose ........
June 17, 201213 yr Parker.com Or mcmaster.com would be where I'd start. Parker has local stores as well. - - - Updated - - - John, Now that I am not on my phone... Below is 1/2" parker heater hose, silicone std wall. Use this hose and put it inside the firesleeves below. Also, this stuff will work as conduit for electrical or pneumatic lines. [TABLE=width: 100%] [TR] [TD=class: column_header_part_list]6722-0500050[/TD] [/TR] [/TABLE] http://www.parker.com/portal/site/PARKER/menuitem.bb22d5a82bbb5b147cf26710237ad1ca/?vgnextoid=a2d9b5bbec622110VgnVCM10000032a71dacRCRD&vgnextfmt=EN&vgnextcatid=2770092&vgnextcat=HEATER%20AND%20COOLANT%20HOSE&vgnextdiv=D45361&vgnextpartno=6722-0500050&Wtky=HOSE They also have "firesleeve" that is a bit more stout. http://www.parker.com/portal/site/PARKER/menuitem.bb22d5a82bbb5b147cf26710237ad1ca/?vgnextoid=a2d9b5bbec622110VgnVCM10000032a71dacRCRD&vgnextfmt=EN&vgnextcatid=2770091&vgnextcat=FIRESLEEVE&vgnextdiv=D45361&vgnextpartno=6639-0750032&Wtky=HOSE The brouchure on the firesleeve is at the below link... Rated at temps: Continuous: -65 to +500°F * Intermittent: -65 to +2000°F. Honestly, this stuff should do you, 85psi rating, 500F continous rating... If you have things under your hood over 500F you have some serious heat radiation problems and will want to heat wrap or coat the crap out of those twins. http://www.parker.com/portal/site/PARKER/menuitem.de7b26ee6a659c147cf26710237ad1ca/?vgnextoid=fcc9b5bbec622110VgnVCM10000032a71dacRCRD&vgnextfmt=default&vgnextdiv=687563&vgnextcatid=2633653&vgnextcat=SFS+SERIES+-+SILICONE+FIRE+SLEEVE&Wtky=
June 17, 201213 yr Author Awesome awesome awesomecpl questions though1) This the correct ID and OD ? I guess I can go pull the lines off the truck and measure myself - but if u know[TABLE=width: 100%][TR][TD]INSIDE DIAMETER[/TD][TD]1/2 in. (13mm)[/TD][/TR] [TR=bgcolor: #F3F3F3][TD]REINFORCEMENT BRAIDS[/TD][TD][/TD][/TR] [TR][TD]OUTSIDE DIAMETER[/TD][TD]0.815 in. (21mm)[/TD][/TR][/TABLE]2) where do you actually order it - its talking about 50ft lenghts3) Can be used for AUTO coolant purposes ? Says glass/welding shops / foundries ....
June 18, 201213 yr Let me check through it and see... I'm not at my computer today. As for where to get it they usually have either Parker sales shops or Parker dealers around most industrial towns or some farm towns.
June 19, 201213 yr Awesome awesome awesome cpl questions though 1) This the correct ID and OD ? I guess I can go pull the lines off the truck and measure myself - but if u know [TABLE=width: 100%] [TR] [TD]INSIDE DIAMETER[/TD] [TD]1/2 in. (13mm)[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]REINFORCEMENT BRAIDS[/TD] [TD][/TD] [/TR] [TR] [TD]OUTSIDE DIAMETER[/TD] [TD]0.815 in. (21mm)[/TD] [/TR] [/TABLE] 2) where do you actually order it - its talking about 50ft lenghts 3) Can be used for AUTO coolant purposes ? Says glass/welding shops / foundries .... Ok John, back from two solid days of wrenching back at the family farm. (the 02 is looking MUCH better though!) 1. I am not sure what the correct ID and OD is, I am pretty sure that it is likely a standard, and could be either measured or just ordered from NAPA. 2. If we look at the data sheet from the first link I posted, it looks like it is recommended for use as heater hose in cars, trucks and buses. See row 3 in the below table. Also, the Parker hose is rated to 350F by itself. Probably not too much more than the stock rubber hose, but it is a silicone hose and may cost similar if you can find a local Parker vendor. [TABLE=width: 100%] [TR=bgcolor: #F3F3F3] [/TR] [TR=bgcolor: #010180] [TD] DESCRIPTION[/TD] [TD]ATTRIBUTE VALUE[/TD] [/TR] [TR] [TD]PRODUCT TYPE[/TD] [TD]INDUSTRIAL HOSE SILICONE[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]APPLICATION[/TD] [TD]Heater hose for cars, trucks, and buses[/TD] [/TR] [TR] [TD]INSIDE DIAMETER[/TD] [TD]1/2 in. (13mm)[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]REINFORCEMENT BRAIDS[/TD] [TD][/TD] [/TR] [TR] [TD]OUTSIDE DIAMETER[/TD] [TD]0.815 in. (21mm)[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]WEIGHT[/TD] [TD]16.90 lbs. per 100 ft.[/TD] [/TR] [TR] [TD]MINIMUM BEND RADIUS[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]MAX RECOMMENDED WORKING PRESSURE[/TD] [TD]83[/TD] [/TR] [TR] [TD]MAX STEAM WORKING PRESSURE[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]LENGTH[/TD] [TD]50 ft.[/TD] [/TR] [TR] [TD]TUBE CORE MATERIAL[/TD] [TD]Silicone[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]COVER MATERIAL[/TD] [TD][/TD] [/TR] [TR] [TD]COVER COLOR[/TD] [TD]Blue[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]REINFORCEMENT[/TD] [TD]High-temperature-resistant plies[/TD] [/TR] [TR] [TD]TEMPERATURE RANGE[/TD] [TD]-65ºF to 350ºF[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]TRADE/BRAND NAME[/TD] [TD]6722 X-treme Standard-Wall Heater Hose[/TD] [/TR] [TR] [TD]BRANDING[/TD] [TD]PARKER SILICONE SERIES 6722[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]BRAND DESCRIPTION[/TD] [TD][/TD] [/TR] [TR] [TD]PRESSURE RATING[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]VACUUM RATING[/TD] [TD][/TD] [/TR] [TR] [TD]SAFETY FACTOR[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]INDUSTRY SPECIFICATION[/TD] [TD][/TD] [/TR] [TR] [TD]FITTING STYLE[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]COUPLED ASSEMBLIES[/TD] [TD][/TD] [/TR] [TR] [TD]PACKAGING[/TD] [TD][/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]UNSPSC[/TD] [TD][/TD] [/TR] [TR] [TD]ADDITIONAL DETAIL[/TD] [TD]STD HEATER HOSE 1/2"X 50' BLUE[/TD] [/TR] [TR=bgcolor: #F3F3F3] [TD]SYNONYM [/TD] [/TR] [/TABLE] 3. The hose in the first link is the actual hose... The second links are for the fire sleeves that will add a good amount of additional insulation and protection from hot glowing metal and hot air. They won't however, keep the internal hose completely cool. also... I've used the fire sleeves before in race applications, and basically they are just sleeves that you run your hoses in. I think we ran fuel and air lines in them if I recall right. You may be able to even use the fire sleeve on the stock heater hose and save some money while getting pretty good heat protection... Also, below is a list of the parker locations in NC, based from their site. I've used the parker shop near the family farm for years... Swagelok fittings, hydraulic hose, etc... but there may be a better place to find what you need. They have just worked well for me. [TABLE=class: sortable, width: 100%] [TR=class: even] [TD]MEDICAL SYSTEMS DIVISION 1517 IVAC WAY CREEDMOOR NC UNITED STATES 27522 457989 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [/TABLE] [/TD] [TD]CREEDMOOR[/TD] [TD]NC[/TD] [/TR] [TR=class: even] [TD]GEAR PUMP DIV 101 CANTERBURY RD KINGS MOUNTAIN NC UNITED STATES 28086 Ph: (704) 730-2000 Fax: (704) 730-5832 200394 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]KINGS MOUNTAIN[/TD] [TD]NC[/TD] [/TR] [TR=class: odd] [TD]HYDRAULIC VALVE DIVISION 203 PINE ST FOREST CITY NC UNITED STATES 28043 Ph: (828) 245-3233 Fax: (828) 245-4235 687401 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]FOREST CITY[/TD] [TD]NC[/TD] [/TR] [TR=class: even] [TD]INDUSTRIAL HOSE PRODUCTS DIV 465 AIRPORT ROAD SALISBURY NC UNITED STATES 28147 Ph: (704) 637-1190 688929 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]SALISBURY[/TD] [TD]NC[/TD] [/TR] [TR=class: odd] [TD]PRECISION FLUIDICS DIV 127 SPEEDWAY DRIVE MOORESVILLE NC UNITED STATES 28117 Ph: (704) 662-3500 Fax: (704) 660-9344 400609 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]MOORESVILLE[/TD] [TD]NC[/TD] [/TR] [TR=class: even] [TD]SSD DRIVES DIV 9225 FORSYTH PARK DRIVE CHARLOTTE NC UNITED STATES 28273 Ph: (704) 588-3246 Fax: (704) 588-3246 688297 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]CHARLOTTE[/TD] [TD]NC[/TD] [/TR] [TR=class: odd] [TD]TECHSEAL DIVISION 2600 WILCO BLVD WILSON NC UNITED STATES 27893 A79696 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [/TABLE] [/TD] [TD]WILSON[/TD] [TD]NC[/TD] [/TR] [TR=class: odd] [TD]KIT DIVISION 125 EAST MEADOWVIEW ROAD GREENSBORO NC UNITED STATES 27406 687321 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [TR=class: odd] [TD]Sales Office[/TD] [/TR] [/TABLE] [/TD] [TD]GREENSBORO[/TD] [TD]NC[/TD] [/TR] [TR=class: even] [TD]NYCOIL 164 POINTE SOUTH DR RANDLEMAN NC UNITED STATES 27317 660932 [/TD] [TD][TABLE] [TR=class: even] [TD]Manufacturing Facility[/TD] [/TR] [/TABLE] [/TD] [TD]RANDLEMAN[/TD] [TD]NC[/TD] [/TR] [TR=class: even] [TD]FILTRATION AND SEPERATION DOMNICK HUNTER 5900-B NORTHWOODS BUSINESS PLW CHARLOTTE NC UNITED STATES 28269 Ph: (704) 921-9303 Fax: (704) 921-1960[/TD] [/TR] [/TABLE]
I want to get some with stainless steel coating that are heat resistant [close to my twins exhaust secondary]Any idea on size (ID and OD) ?? thanks