Ok never say never..... Just started one day old, when I put turn signal on R or L and I steep on the break pedal the blinker goes dim and quits blinking, release break ped and blinker resums normal blinking.??? What, and where do I start? Thanks Dave..

I would start by just looking at the wires going to your turn signal/brake lights, chances are you will find a spot where the wires have rubbed through. I'm trying to think exactly which wires would be crossing/shorting but its been a long day and my brain isn't functioning 100% right now

You might need a new multifunction switch. 10 minute install.

You might need a new multifunction switch. 10 minute install.

Where's the multifunction switch located? Is it this: http://www.ebay.com/ctg/Mopar-4728424-Combination-Switch-/83658493 or this: http://www.rockauto.com/catalog/moreinfo.php?pk=1481968&cc=1377569

That is it. Those both look the same to me.

They are the same, was just putting two links up for anyone interested. I did a search for the mopar part number which I got from alldiy.com for the 'combination' switch and that's what google gave me. If anyone needs it, the part number from alldiy.com is

4728424

Mine was held in with t20 bolts. It is in the steering column as I'm sure that was obvious when you saw the part. Remove the plastic cover from the column and then remove the switch. I hope it fixes your problem.

:thumb1:Looks like I replace a switch today. Thanks all, Dave.