For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
Well Gang. I've been seen these goofy threads about people trying to figure out if a heater core is functional or plugged up. So since I took my truck to town for a job I figure I do the bench testing for the heater core to let you know what a good functional heater core will do. So measuring the vent temperature from the center vents with Bi-Level setting I measured...Fan Lo - 160*F roughlyFan Hi - 150*F roughlyOutside temperature - +10*FEngine Coolant Temperature - 193-195*FAs for the heater hoses they should not both be equally hot. I checked mine after driving about 6 miles from town stopped at a rest area and left the blower on Hi and felt both hoses. The hose from the head is very hot and you can only hold it for a short period before the heat burns your hand. As for the other hose that routes under the turbo in the steel tube that hose is warm but you can hold on to it for a very long time without even letting go. I see several threads where people say that if both hoses are hot the heater core is functional. This is wrong there should be a exchange of heat/cold with the heater core so one hose should always be cooler which is the return line from the heater core. If both hoses are equally hot then the heater core is not exchanging heat/cold and not flowing optimally. So I figure I'd throw this tidbit out there for everyone and hopefully help others diagnose heater core performance issue.