
Everything posted by Thotsmasher
-
Body work.....She's getting there
So why cant I put pics on here no more
-
Body work.....She's getting there
Sorry I been Mia for awhile, been busy as all hell. Truck update . She is back from frame shop , had a few kinks in front horn. Everything is lined up minus a passanger hood hinge. Front end is together minus finishing touch on my 4th gen bumper. I'm putting the body lift on before I finish the bumper. Lights are done for now. And waiting to exchange leakey gear box out for new one. Throw rims on and take it in for wheel alignment... I have still have along ways too go. But I've been real freaking busy. I'll get pics here soon I'm gonna take some 1/16 steel and do some work on that silly *** gap. It's getting painted anyway. And I'm not cutting off the corners of the bumper too move it back . I'll loose too much rigidity. It will look good after I get my hands on it lol
-
Is it worth it
He said 3k for the truck..I dont think that's too bad for a 12 valve with 112k on the truck. Be a nice motor set too the side for a swap. Idk. Guess it comes down to how much more sh#t do I actually need.
-
Is it worth it
One of our drivers asked if I wanted to buy his 91 1st gen 12 valve ,2 wheel dr 112k on the truck ..what's it worth . Full power pretty clean . And he all ready did alot of maintenance on it. He has a few of them . I guess he found a 1ton dually he wants .
-
Body work.....She's getting there
Still need to put my 3inch body and all new body mounts on. And I think my tires will lift it just a tad bit more too. This winter will be the compound set up....maybe lol. Hell your truck is pretty tall too dude lol. I like it ,I like it alot lol Anybody else have no life and likes to troll the bone yards on the weekends lol. I did just pick up 2 more rust free fenders though for 50 bucks .?♂️
-
Body work.....She's getting there
-
Body work.....She's getting there
Well said...but I think if I was married I dont think my wife would allow 4k worth of rims and tires as my coffee table in the living room though..??? Ofcourse I could put them in the garage but I what fun is that. Pmd...lol I actually have a 41 ford fire truck that would love that 6.0 come to think about it?
-
Body work.....She's getting there
In the driveway..you are a mvp lol. I bought a standard sb with a 316 just for the bed . Its mint and black . Gave 600 for running driving 4x4 sb. But a gasser. I never seen a sb ctd either!?
-
Body work.....She's getting there
Bullet...I've owned 6 ford 6.0s. I get them very low miles. And bulletproof them. Never once had a problem besides injectors. And that's with hot tunes ,bigger injectors turbo and ect ect towing 15k 20k at 80 90 mph for 3 or 4 states at a time. I love 6.0s best motor ford made, I have a 03 right now I use for work only. They sound amazing, pull hard and run harder. I'd like to put a built one in my 2nd gen ?. I know that is gonna spark a fight lmfao..Just have to catch the 6.0 young like a wife and mold it. And oil changes religiously Lol. It will never let ya down. And very nice short bed dude ...hard to find the short bed 4x4 dodges .
-
Body work.....She's getting there
Spraying bc/cc over it yes..the liner fades after a while. It's actually funny..I travel state to state for work. And kid you not ,you have chevy girls, ford girls ,dodge girls. I call them Mud Crickets And they stick by it if your driving what they like your truck is getting you laid lol.I was in bucksport Maine for 2 years and I had my 06 P stroke ,Trust me that was a ford state lmfao. This is right on the penobscot river in bucksport. Beautiful out there.
-
Body work.....She's getting there
Passengers side is 90% done . Did the herculiner on rockers and a lighter coat on inside of doors . Inside of fender for further protection, yes the plastic liner is going back in .The whole bottom of truck is getting zebart after it's done. Finally started on driver side yesterday. Been real busy and lazy. This stuff is like talking to your ex gotta work yourself up to want to do it...lol. But it's getting there
-
No Sound from Front Speakers
I had same problem.. come too find out my speakers in front doors locked up from all the moisture in my rotted out doors lol. So no more sound. New front speakers ,jb welded amps on back of new 6x9s all was well.
-
Body work.....She's getting there
I have a couple extra dash bezels in my closet ready for a double din lol
-
Body work.....She's getting there
Door is on, new rubber all the way around.. still need to line it up totally. Had to change door harness . Non Bose amp system plugs are different then mine .. and a shot of my double din install I did .
-
Body work.....She's getting there
Light grey ..its hard to match that weird black dodge has in the 2nd gen. How much .
-
Body work.....She's getting there
I just want to get her back on the road for the summer. Then this winter I'm gonna get interior work. I have all the black or dark slate plastics too put in and change out, then black leather with black suade .Just need a good dash now. If I cant find one I have a nice 3rd gen dash to throw in it.
-
Body work.....She's getting there
I get the door on the passenger side is complete besides the final bc/cc job. I'm gonna leave the outside for the professionals tho. Lol inner and outer rockers were a mudder trucker.
-
Body work.....She's getting there
Door is edged out..my 1st time spraying. Looks ok to me just wished I could of had some time with the gun before I painted my stuff lol. Like the new tri axle box we got would of gave me a lil better understanding. ?♂️ o well. I'm leaving the whole truck to the pros anyway .
-
Body work.....She's getting there
Fin with me..but we better start with a 24 for good measure lol It's all new steel inner ,outer rockers and cab corners all raybuck. No rust left on my truck doors are from a 90k original owner truck. Any body work whether 20k paint job to a maco paint job has skin coat to get it strait . I'm blocking the whole truck down I want it strait as a arrow sir..lol. kinda wish I would of paid more attention at my dads body shop when I was a kid . Thank you very much gentlemen its alot of freaking work .
-
Body work.....She's getting there
Got at it a little bit this weekend, waiting on more primer , herculiner and gun so I can wrap up the passenger side ..
-
Searching for this emblem
Np.... I personally like it, it goes with the rock lights and my demon eye projector lights. You got it though.
-
Searching for this emblem
Little up date my buddy has the program done and ready to make it.. said he is really busy so maybe this Friday he will run the 1st few. The " C " will protrude maybe 3/8s to 1/2 inch make it catch your eye . I'm gonna order up the LEDs this weekend .
-
Searching for this emblem
I've been looking for awhile that's all you find is plastic. Not much out there for the emblems unless you pay 100s for a custom one. When I'm done, mines gonna glow in the dark though??
-
Searching for this emblem
As do I sir...you guys will be the 1st to know.
-
Searching for this emblem
I'm gonna call my buddy see where hes at on it. He has to build the program for it 1st.. he made alot of 1 off things for my Buick GN, he said he will get it done for me and his word is golden. Those Cummins on Amazon are all plastic stuff. And the edges are ruff where they break them off in assembly line there cheaply made . I bought that exact one myself but ehhh. This billet one is gonna look good when there done. The original guy that made them I guess is nomore . So I'm not laying claim to his work as nice as it is . I'm just having it reproduced there very nice piece's.