Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

To display the Hour Meter on your 3rd Generation Cummins

Mopar1973Man

By Mopar1973Man
in 3rd Generation Dodge

 Share

Recommended Posts

  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

This is really simple to do. First off turn on your ignition but do not start. Now quickly press and hold the trip button down for at least 5 to 10 seconds. The hour meter should be displayed in the odometer with Hr and then the number of hours next. This way you can base your maintenance on hours if you tend to idle quite a bit.  

  • Like 1
Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...