Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

code 0251

heathw
 Share

Recommended Posts

  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Ummm... Well starting price of a VP44 is about $1,200.00... :spend: You might want to run through the vendor list here... http://mopar.mopar1973man.com/cummins/dealers/dealers.htm Or go over to the vendors area and ask them directly... /forums/67-Vendors-amp-Dealers">http://forum.mopar1973man.com/forums/67-Vendors-amp-Dealers As for installing most anyone with standard tools can install one but the only special tool is the gear puller. Some people have fab'ed up some steering wheel pullers or just purchased the actual puller...

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...