Truck Exterior

Better Headlights for your 2nd Gen Dodge Ram Truck  Parts Needed:: Morimoto Projector Kit ( ensure you get the 9004 kit with the High beam controller AKA Motocontrol and the longer thread reflector) Clear lense housings ( not required, but way better output, ensure housings are aimable.) Flat head Screw driver Phillips Screw Driver T15 torx screw driver 10mm socket extension / 10mm open ended wrench Oven Epoxy   Why to upgrade to Bi-xenon Pr

LED Lighting   Parts List LED marker light LED Taillight Heavy duty LED flasher   As for installing it just simple change of parts. The flasher is found in your driver side of the dash. If the flasher been there a while then it might be difficult to remove. Just take your time and work the flasher it will come out. Pull the stock flasher out and plug in the new flasher.    As for the taillights you need a T25 screwdriver. There are 2 sc

LED Under hood lighting for Dodge Ram Trucks I wanted more light under the hood when I am working there or when I was just checking oil or other fluid levels etc.   I decided to try installing some LED lights to see if this would improve the situation.  Since this was to be an experiment to see if it could improve things and if I would like it I didn't want to spend a lot of money to start with. &

OK Guy's.."The moment you've all been waiting for" Here is a complete start to finish Details on Converting Standard 2-headlight system to a Sport Quad headlight sys. i did a few months ago Let me tell you it was a P.I.T.A...i had nothing to go on as none of the threads i found on any of the forums involved building your own from scratch "w/Heavy Duty Stuff" ..most of the write ups were people who had bought a pre-wired harness..like the ones for example suvlights.com or others..all reported