For Sale - 2006 Dodge Ram 2500- Flatbed for long box bed Winch bumper Flat Bed for Long Box 3rd generation Cummins Tootlbox are included with key I have a flatbed for 3rd Generation dodge Cummins. This flatbed comes with a gooseneck hitch already in the bed. The winch bumper is part of the set. Tootlbox have a key to lock and unlock all box a single key. There is rust starting and electrical will have to be sorted out on your own.
-
Price: $1,000.00
-
Location: New Meadows, Idaho
ronman 6 posts
Mopar1973Man 3 posts
flagmanruss 3 posts
These are the factory hoses/lines off my early '01 3500, with 240K on the clock.
^
Side by side of the valves; field-replaceable low-side on the left, non-serviceable high-side on the right.
^
High-side valve in detail. Note the seam where the valve assembly is pressed into the bung on the line.
^
High-side part number. I assume the AA revision has something to do with the integral orifice valve, but I have nothing to substantiate that.
^
The aluminum tube section containing the orifice valve (behind the pass. side battery) is wrapped in a thick rubbery mastic and then covered in aluminum tape. There are three deep dimples in the hose to retain the orifice in place.
^
The orifice is not serviceable; the line must be cut to remove it. It is installed at the factory before the individual sections of the line are soldered together.
The retention dimples are clearly visible here.
^
My factory orifice was a pretty decent shape, considering its age. The nylon screen was worn at the outlet.
^
"T&L" stamped into the lower part of the high-side valve.
^
The amount of thickness in the valve body itself is quite substantial.
Edited by ronman