Jump to content
View in the app

A better way to browse. Learn more.

Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Posted

on 2013+ trucks there are 2 filters that should be changed every 15,000 miles.  this should be done when you do your oil filter

 

Parts needed / Part number

1. 68197867AB fuel Filter

2. 68157291AA Water separtor

3. 29mm socket f or the fuel filter cap

4. ratchet / extensions / elbows 

5. oil filter rubber wrench is helpful for the water seperator

 

Filter Locations

2017RMT130004_640_03.png

 

 

Filter 1 is on the driver side of the engine mounted to the block. You will need a 29mm socket to undo this.  You will also likely need a elbow or 2 to get around the hood cowl.  Note the cap is plastic so take care not to strip it.  

ff.jpg

 

Filter 2 is located just in front of the Rear Axel centered above the drive shaft.  This filter is a screw on filter.  

 

** please note that you will get a good amount of fuel spillage when you unscrew this filter.  Ensure your eyes are not going to be leaked on.  

maxresdefault.jpg

 

 

Note the water in fuel sensor / drain.  this sensor can be unplugged from the truck harness to make removal easier.  

 

The Part number for this is PFRK54553  but you dont need to replace unless damaged.  a new o-ring comes with the filter.
wfsensor.jpg


View full Cummins article

  • Views 1.5k
  • Created
  • Last Reply

Featured Replies

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.