I got everything disconnected and the 4 bolts holding the turbo to the manifold loose and the turbo still won’t come off. Any ideas what I’m doing wrong?

Edited June 21, 20205 yr by Jans28

can you snap a picture?    

might take a light tap with a hammer to seperate the turbo from the manifold.

I’ve give a couple taps with mallet doesn’t even wiggle 

does it look rusty?  you are %100 sure everything is disconnected?   

 

A little rusty not to bad. The only thing I haven’t full disconnected is the exhaust pipe I loosened the clap but haven’t taken it off 

do you have something like a plastic putty knife?   Iwould try and get that between the flange and see if it comes undone.