Jump to content
View in the app

A better way to browse. Learn more.

Mopar1973Man.Com LLC

A full-screen app on your home screen with push notifications, badges and more.

To install this app on iOS and iPadOS
  1. Tap the Share icon in Safari
  2. Scroll the menu and tap Add to Home Screen.
  3. Tap Add in the top-right corner.
To install this app on Android
  1. Tap the 3-dot menu (⋮) in the top-right corner of the browser.
  2. Tap Add to Home screen or Install app.
  3. Confirm by tapping Install.
Posted

I went to leave work today and noticed a hazard sign flashing on my Adrenaline display.  It was coming from the trans temp icon.  I opened it up and the temp was bouncing all over the place, anywhere from 0-220*.  I have a mechanical gauge that was still reading less than 100 and the truck had only been running a few minutes so I knew the fluid wasn't hot.  When I started driving it settled at 100* and stayed there only occasionally popping up to 108* and then back down to 100*.  By the time I got home my mechanical gauge was at 140* while the Quad was still hanging at 100*.  The transmission performed flawlessly as usual, could this be an issue with the Quadzilla or the truck computer?

  • Replies 4
  • Views 1.4k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • Mopar1973Man
    Mopar1973Man

    Trans temp lead is touching metal. There is one lead that is with a ring terminal. Make sure it's not touching and metal. I'm using the trans temp and engine oil temp. Just double check that wire.

  • Mopar1973Man
    Mopar1973Man

    Remember I got that sensor in the oil filter housing to measure the engine oil temp.

  • Sycostang67
    Sycostang67

    I tried to do that but the heater core lines are too close and I didn't have enough space for the sensor to protrude without hitting them.  I remember that day very well as I had removed the factory p

Featured Replies

  • Owner

Trans temp lead is touching metal. There is one lead that is with a ring terminal. Make sure it's not touching and metal. I'm using the trans temp and engine oil temp. Just double check that wire.

  • Author

You nailed it Mike, that ring terminal was laying on the metal part of the hydroboost line.  I went and secured it a little better, some day I'll hook it up to something.  

  • Author

I tried to do that but the heater core lines are too close and I didn't have enough space for the sensor to protrude without hitting them.  I remember that day very well as I had removed the factory plug in the hole and accidentally hit the remote start button on my truck resulting in a geyser of freshly changed oil.   

Configure browser push notifications

Chrome (Android)
  1. Tap the lock icon next to the address bar.
  2. Tap Permissions → Notifications.
  3. Adjust your preference.
Chrome (Desktop)
  1. Click the padlock icon in the address bar.
  2. Select Site settings.
  3. Find Notifications and adjust your preference.