Recently purchased a 2002 ho truck and got a good deal because the motor isn’t happy ( knocking and crazy blow by). To solve this problem I’ve purchased a 2000 model engine. Forgive me I am learning these 24s I’m used to 12 valves. I know now that there’s the two sub generations 98.5-00 and 01-02 and they don’t interchange very well. 
 

My main question is am I going to run into problems with the swap even with swapping the pcm/ecm/ engine harness ? Got a steal of the 2000 engine everything for 800$ so I really want to make this work .

 

 

Your going to want to read the article about this.

https://mopar1973man.com/cummins/articles.html/24-valve-2nd-generation_50/51_engine/swapping-vp44-cummins-engine-between-985-00-01-02-r429/?do=getLastComment&d=4&id=429

 

 

I know the text is dark. I'll try and fix it.

 

3 minutes ago, Mopar1973Man said:

Your going to want to read the article about this.

https://mopar1973man.com/cummins/articles.html/24-valve-2nd-generation_50/51_engine/swapping-vp44-cummins-engine-between-985-00-01-02-r429/?do=getLastComment&d=4&id=429

 

 

I know the text is dark. I'll try and fix it.

 

 I’ve read the dark text . Sounds like my swap should be fine then , fingers crossed 

Better read again...

 

 

Just replaced a photo that is missing... As you can see the cam has to be swapped and so does the gear case to get the engine swap done.

7 minutes ago, Mopar1973Man said:

Better read again...

 

 

“For the proven method of swapping sub generations, you WILL need the ECM, PCM, full engine harness & PCM at a minimum”

 

I have all this , and worse comes to worse can grab the trucks harness as well , dash too . Only thing I can think of that won’t work is cruise control after the swap 

On 6/3/2024 at 8:28 AM, Not2Smart said:

“For the proven method of swapping sub generations, you WILL need the ECM, PCM, full engine harness & PCM at a minimum”

 

I have all this , and worse comes to worse can grab the trucks harness as well , dash too . Only thing I can think of that won’t work is cruise control after the swap 

Just to update got the engine swapped between yesterday and today and took for a road test. No issues . Only thing that don’t work anymore is cruise, which I knew wouldn’t going into this .
 

So to conclude, only things swapped are as listed

*2002 engine swapped to 2000

*ecm/ pcm from the 2000 donor

 

I didn’t list the engine harness because who pulls the harness off the engine when they pull it