Jump to content
Posted
  • Staff

On September 6, 2016, I wrote the article "Adding inline power steering filter with system flush" and posted it in 24 valve 2ed generation/Axles, Suspension & Brakes. This is the follow up to that article.

Update...7/25/2025

It has been 8years 9months and 44,888 miles since I installed the Magnefine filter and flushed the power steering system, so it was time to flush the power steering fluid and replace the filter again. I used an oil syringe fluid evacuator pump this time to remove and refill the fluid at the power steering pump. The picture below shows the first time the fluid was removed from the system

20250725_134542.jpg

 

It took 5 remove, refill, and run engine for 4secounds to get the fluid to this clear color, about 2qts.

20250725_134827.jpg

Here is the filter cut open. It looks like the filter could last 60,000+ miles before changing.

20250725_150918.jpg

There was just a fine film on the magnet.

20250725_150943.jpg


  • Views 28
  • Created
  • Last Reply

Posted Images

Featured Replies