Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
So it's done it since I've owned the truck, but anyway...Turn the key on: Oil pressure goes to about 40-45psi on the gauge. "Wait a minute.. I haven't even started it.."Stays there, too, after I start it, and drive it. It stays put there, as long as the key is on.. If I unplug the Oil Pressure Switch harness, it goes to zero, so something tells me it's the actual pressure switch?... At the nice price range of $180 (Rock Auto), to $212
at Advance Auto Parts; Auto Zone wants $193 for it.. :nono:Is there something you guys may know about that could be causing this? I mean, something like the 'low oil pressure) TSB, but opposite, obviously.. :)Thanks.