Jump to content
Posted

I put a headache rack on my bed and discovered the bed is not quite aligned with the cab. Can it be moved slightly from side to side if I loosen the bolts?Thanks,Stew

  • Replies 4
  • Views 1.6k
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

If memory serves me correctly I think you do have a little bit of movement. Loosen the bolts off and try

  • Author

Thanks! Guess I know what I'll be doing this afternoon. Stew

Yes, you have a bit of movement in the bed and cab. Get under the truck and measure from the cab to the frame adn the bed to the frame.

  • Author

Thanks for the help. As it turns out, the cab was offset to the right about 3/4". Loosened the 8 bolts and used a pry bar to move it over. Everything lines up nicely now. Strange though, 4 bolts were 3/4" and 4 of them were 18mm. Stew