Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
Last Saturday while I was at my retriever clubs upland training day, I saw a part on a Dodge gasser that I thought I could modify slightly to help block off more of the front of the truck. This part goes in the opening below the front bumper step pad and the chrome bumper itself. It's black plastic that fits into the opening where my tow hooks are at. Between the tow hooks on my truck there is a wide open area to the radiator. Even with my home made winter front, there is still a big opening in the front of my truck. The truck that had this on didn't have tow hooks, but I thought I might be able to cut holes around the hooks to mount this in there. I looked in the manual, but couldn't find the part name or a picture of it. It would be about 4 feet wide and 4-5 inches high with a concave shape. Ideas.For you 2nd gen guys, the area I'm talking about would be in the OEM fog light area on your trucks. If you look at a 3rd gen truck you'll see where I'm talking.......I hope!!!:confused: