Ronniemx3

Swapped the injector to no 1 cylinder and yeah it seems to not fire at idke as the engine not does not change when cracked off.. im going to clean it and see if i can find the issue

Well done it all again and found no 4 injector not firing. So going to swap it out with number 1 and go from there

Thanks i will do it in the morning.. thanks for your advice everyone. I will let you know how it goes

I will just strip it all out again tomorrow and re do it all.. so put the injectors in then cross overs then tighten the hold downs and do up the HP lines??

I would then have to strip the the apps intake and vp nuts as will wont i??

@Mopar1973Man i will loosen the 19s off completely and try lift the injectors slightly to re seat them.. its odd do you think it could be cross overs?? Its only a very slight vibration not even a miss then if i pick the revs up to 1k 1050 it vibrates a bit more then its smooth all the way through

I will pull the rocker off tomorrow and back the lines and injectors off. Or should i remove the hp lines all together??

I fittedthe injector and tightened down to spec and pushed the cross over tube in they all seemed to pop back in

Fitted my 60hp injectors today and now have a slight 'miss' at idle truck pulls hard still no issues higher in the rpm range just a vibration in the cab at idle. Any ideas??

@Stormin08 its been on this truck for years but got some 60hp sticks waiting to go in.. ive noticed it boosts more with the elbow and the fooler makes its smoke slightly more when getting on boost.. but the SC i find is good for what i want. When my new gauges arrive i will fit the sticks hopefully there is a nice improvement

@Stormin08 hmm i guess i will verify when i get some gauges. As from what i found online it says they dont boost fool. So i could just take the fooler off and leave the elbow??

It does but i hate having to pay the taxes on it ?

Ive got 60s waiting to go in but going to fit my pyro and boost before they go in.. man i want a quad bad but i will have 27% import duty on it when it gets to the uk ?

@Dieselfuture nice one.. yeah i dont want to hurt nothing.. i dont know if the superchips 3705 is just timing or with fueling etc.. i will fit it up even if it gains a couple of pounds every little helps ??

It doesn't unfortunately but either way that shouldnt affect the operation as the wastegate will still open at factory set 20psi shouldnt it?? The elbow is what would physically up the boost the fooler just stops the truck throwing a code and defueling

I do have a gauge and a air dog 150.. am i likely to see any improvement in performance running these without the extra fueling

Hi everyone, got my injectors thanks to @Dieselfuture.. but havent got time to fit them till next week when i get back from my 600 mile trip. i was going to put my boost elbow and fooler on tonight is there any point ?? Currently got a superchips tuner on and BHAF... the elbow comes pre set to 30psi. I havent got any gauges installed yet but they have been ordered. Any advice??

Thank you @Mopar1973Man i will have too rip it apart and try find the issue

The 3rd switch from the left isnt working the one i need to know the function of Thanks man

My lumbar works on the far right switch ? that works ok.

Hi everyone ive just been doing a few small odd jobs on the truck one issue i have is the seat switches they all work apart from the toggle switch to the right of the square switch.. what does this switch do and is there any common faults with this adjustment thanks ??

@CTcummins24V my truck is a 99.. thats why im torn between rv275 and 75hp injectors.. i like the quad because of the adjustability and can make it suit most set ups.. i think im going to sort injectors then programmer and when the trans lets go i will build that.

That's my problem i dont know what to aim for i want a reliable pretty quick truck not something that spends more time on a ramp due to issues. My plan was to gather gearbox parts as and when i can get around import duty as its criminal the amount we have to pay. So when the box burns up i have pretty much what i need to rebuild it. I think i would be happy with 300-350hp.. its just a fun truck that i throw my mx bike on.. so my list was: quadzilla programmer Injectors Billit triple disc TC Gearbox rebuild with quality after market parts. Shift kit Anything else you guys reccomend??

Yeah ive got a shift kit waiting to go in and if im taking the box out to do the TC i may as well give it a freshen up inside i will speak to some of the dealers on here.. thanks

Nice one thanks for your help ???? Yeah i went to school in my truck as kid only took 15 years to finally own it ?