Search the Community
Showing results for tags '1998.5'.
-
I’m finally getting around to replacing all the battery cables and doing the WT mod. I have a very early 1998.5 24V, and all of the other posts and pictures about the WT mod seem to be on later second gens. I have pictures attached with markups. Can someone please confirm I’m on the right path. Thank you!!!
-
Alright, a lot has happened with the truck since I last commented on here. My truck is a 1998.5 slt Laramie(I have the pull out headlight switch), everything I read online says it comes with foglight wiring. I bought a set of 4 led pods, 2 fog light relays(as my PDC had the slots and 12v power running to them, I used a test light to check for power) I installed the 10amp fuse for the drl lamp spot as it was missing for some reason but was also hot. My trick has a plug in the center underneath the radiator. I went to the salvage yard and found a truck with some foglight wiring but it was 2 prong plug, and I found a truck with a 3 prong plug like mine but just the plug as the wires had been cut. I know I can just run them to the battery and then to a switch, but I want it to be as factory as possible. The 1998 foglight/airbag switch is discontinued so I was going to try and wire my low beam power to the relay which would then send power to the foglights when low beams are on. So my question is, is this 3 prong plug correct or am i SOL? And if it is correct what other fuses/relays do I need to install in PDC or fuse label in cab to send power to fog lights while low beams are on. I know I would have to splice atleast 1 set of wires.
-
As my signature says I have a 1998.5 24v Cummins. I want to list the build sheet and mark what I already have done. I would like you thoughts on hp/tq numbers I could possibly see and Different brands or routes to go with different parts of the truck. Also would like opinions on my taste for the appearance of the truck. = Purchased/On Truck = Tab is Open On Computer But Haven't Pressed Checkout. Mainly a Funds Problem haha Build Sheet: 1998.5 Cummins 5-Speed 13" Valair Single Disc 500/100 Clutch Kit w/ 1 3/8" Upgrade Input Shaft ATS 3-Piece Manifold BorgWarner SXE 62/68/70 Turbo HX40 Downpipe 5" Straight pipe Exhaust to 8" Tip Crazy Carls Intake Elbow Crazy Carls Tunnel Ram Intake 7x.011 Sac Injectors - DFI 104# Valve Springs Heavy Duty Pushrods - DFI ARP 425 Headstuds S&B Intake Fluidampr Quadzilla Adrenaline w/ Iquad(Possible V2 Upgrade?) Smarty S03 Traction Bars Track Bar - DOR Steering Brace - DOR All new HD Steering Components - Moog 2.5" Leveling Kit 18x10(12) or 20x12 Chrome/Forged Wheels with 33 or 35" Tires Bedliner Front Shocks Rear Shocks Stabilizer Shock Windshield Tint All Around as I have some kinda eye condition where I go blind when I see lights at night. I forgot what its called. Supposed to get a prescription fro doctor. Redo Entire Interior from Carpet to headliner Tow Mirrors(Folded In Until Needed) Clear Projector Headlights, LED Tailights, Led Third Brake Light Remove Tailgate Plastic New Paint Chrome Door Handles Colormatch Bumper Plastics