Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Injector Comparrison

Hawkez
 Share

Recommended Posts

gh0stman

gh0stman

Posted
Posted

Just installed DAP injectors yesterday. They came with the copper washers, injector body O rings, crossover O rings and a 1/2"ish nut that I'm not real sure what I was supposed to do with.

Yeah I was wondering about the 1/2 bolt too. Cant fit it in to pull the crossover tube out.

Link to comment
Share on other sites
Vais01

Vais01

Posted
Posted

I normally use a thin flat blade that will get a good bite on one of the threads and very slowly pry out with steady pressure. So far so good using this practice.

I have seen some very interesting ways of pulling them including pocket knives and other edged tools. Not the smartest idea in my book.

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...