Jump to content
Mopar1973Man.Com LLC
  • Welcome To Mopar1973Man.Com LLC

    We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Recommended Posts

Posted

Well i spoke to DTT, and they said if i cover the cost of shipping that they will gladly take the trans in and give it a once over.So it looks like ima pulling my transmission. This time i am doing it. Screw PATS and their crap.:thumb1:

  • 1 month later...
  • Replies 166
  • Created
  • Last Reply

Top Posters In This Topic

Posted

So, i finally got the trans out of the truck today and several noted issues arose today.

1. I was missing two bell housing bolts, along with 1 cross member bolt, a transfer case bolt.

2. only 2 of the 5 remaining bell housing bolts were even tight, the other 3 were easily taken off by hand with ratchet. When i say loose i mean just no effort was needed to break it loose.

3. one item of concern is the amount of play between my TC and the flex plate, something that i'll discuss with DTT.

Oh and the -=-=-=- Spacer was installed, HAHAHAHPosted Image

I really have no clue why it was there but it was.

good news is that the outer shaft on the input shaft was nice and solid, however the inside one was free moving.Posted Image

Oh and for those of you looking to d0 this, PLEASE put some shims between your cross member and the front of the engine, mine came to rest into the radiator after i got the trans out.Posted Image

  • 2 months later...
Posted

Update:Spoke to DTT and they said the trans should be done by the end of the week, and well discuss shipping it back and what exactly was wrong with it. Im curious to see what the root cause of all of this was.

Posted

I spoke to DTT today and several things came out and nothing new was learned.However they want to raise my trucks TC stall from 500 rpm lower to 200 lower. I also had a discussion with some guys over on cf about the effects of cam and crank sensors on engine stalling, and the weird bouncy tach signal. Which leads me to believe its possible that old sensors are causing the engine to not read everything correctly.Several people have came forward with example of how replacing their sensors actually fixed issues with the tach bouncing up and down rapidly, which i assumed was because of the TC springs bouncing back and forth.So DTT said that the trans was fine, but was missing some parts, which once again leads me back to square one.the goal now is once i get the trans back ill install it with the 500 rpm lower stall and take her for a spin to see where i am, and if the stalling issues persist.

Posted

Pepsi just watched your video on the stalling issue. My truck also stalls when cold 32f and colder, but my engine really puts up a fight, truck lungges, momentary exhaust/engine noise, puff of smoke from exhaust. It acts just like dumping the clutch in a standard with the brakes applied. From what I could tell in your video when you put the truck in gear its mor like the engine just shuts down, seems like the governor doesn't even try to keep engine running.

Posted

that is why i can't figure this out, but i spke to dtt and trans is on its way back. this time around i plan to swap the trans in before i send them my TC (they want me to exchange it out for a higher stall one), mean while. can i ask what your truck idles at rpm wise? is it the 850 that Cummins states, or is it the 750 that shows up on the tach. AND, i plan on replacing the sensors if this guy at this thread shows improvement with his wavering tach. http://www.cumminsforum.com/forum/98-5-02-performance-parts-discussion/531919-why-does-do-start-up-idle.html

Posted

My truck idles at 800rpm, according to my maxitrip (scangauge type unit) on the tack it is slightly above the second line down from 1000rpm. In gear it drops to 750rpm. My tack needle fluctuates approx 20 rpm.




  • Current Donation Goals

    • Raised $20
×
×
  • Create New...