Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Question on hot hard start fuel pump kill relay.

LKuilder
 Share

Recommended Posts

LKuilder

LKuilder

Posted
Posted

Thanks for the diagram on the lift pump kill relay for the hot hard start Michael! That's just what I was looking for! I'm assuming you're just using a normal, 12 volt relay? -Pin 85 on the relay you're just tapping into the starter solenoid wire?-Pin 86 on the relay is just to ground?-Pin 30 on the relay is the positive wire that would be going into the stock plug on the stock lift pump if I was using the stock pump?

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...