Well………….I hadn’t drove my truck in over a month so yesterday I thought I would head up to my hunting spot and check it out. I was going to back in so I wouldn’t have to slow down too much when leaving. The snow was pretty piled up at the road bank and looked a little deep in the parking spot so I gave it a little extra to get all the way in. Now I’ve got the following codes that I think are a result of me throwing snow to get the truck parked. I rolled the key 3 times to get them. 1693, 0500, 0234 I have Superchip controller but I keep the truck in “STOCK” mode all the time. The Superchip says I only have 1 DTC the 0234 I tried to clear the code / codes with the Superchip but all I get is an error and they don’t clear. I’ve used it before and cleared codes. So why can’t I now. Any ideas

http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/59-obdii-error-codes/190-p0500-no-vehicle-speed-sensor-signal This is not a MAP sensor issue this is a wastegate issue! http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/59-obdii-error-codes/165-p0234-turbo-boost-limit-exceeded Got a problem with the network you might try using another OBDII reader...

Forgot to say that I "DID" look the codes up and knew what they were.I was more wondering why I couldn't erase them as I have used the Superchip to do this before.I guess I'll have to stop somewhere and get erased.Thanks...............