Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Cruise Control - ermm.. or lack thereof..

Rogan
 Share

Recommended Posts

Rogan

Rogan

Posted
Posted

So on my old 96, it was a base model with AC only. I bought a CC servo, clock spring, and switch assembly from a JY, threw it in, and presto-whammo! CRUISE CONTROL! :)My 97 had cruise apparently (SLT), but the servo was missing..So I bought a servo, installed it, and wham.. wait.. nope, CC doesn't work..I've studied the wiring diagram, but as usual, nothing at the PCM matches..THere's a yellow/red wire at the brake switch and cc controller. neither gets power. judging by the wiring diagrams, there are wires not where they 'say' they should be at the PCM, but it's really hard for me to decipher, for some reason..Any suggestions or anything you guys may have encountered in the past? I thought for sure, it'd work like my old '96 did.. Denied...

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...