Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Do I need to retain my fuel heater?

Crepitus
 Share

Recommended Posts

Crepitus

Crepitus

Posted
  • Author
Posted

If your adding filters, just go with an airdog, its the same setup but cheaper.

Donaldson P551315 is a 3 micron

Baldwin BF1275 is the best water separator

Baldwin PF7977 in the stock housing is 5 micron

All of the airdogs mount the pump over the filters making a tall assy I am thinking the raptor so nothing is hanging down

BUT a good point; the remote filters will not be heated makeing retention of the stock heated filter pointless.:doh: allways somthin

- - - Updated - - -

aww then there's this:ashamed:

http://forum.mopar1973man.com/threads/6960-Terrible-luck-with-Raptor

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...