Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

Cheap, do it yourself exhaust

joecool911
 Share

Recommended Posts

joecool911

joecool911

Posted
Posted (edited)

Is there a system or composite of components that I can cut and install onto my stock 3" piping and using clamps rather than welding? More noise is acceptable, but cab drone at hiway speeds not too obnoxious.

Edited by joecool911
  • Like 1
Link to comment
Share on other sites
  • 1 month later...
  • 1 month later...
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...