Jump to content

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

No start after tappet cover gasket replacement

Philo Beddoe
 Share

Recommended Posts

Philo Beddoe

Philo Beddoe

Posted
  • Author
Posted

super - just got her running.  had to bleed it a lot more than I thought.   But now I have a lot of pressure building from the oil cap.  I have the 98.5 which has a block in the front timing cover and is vented out the back.  

 

I am thinking about venting it in the front too.  I have over 320k.

 

does anyone run a filter out of the front valve cover - like some of the old muscle cars?

Link to comment
Share on other sites
 Share
Go to topic listing

Rate The Author

Please take the time and give the author a 1 to a 5-star rating for the information you have gained from anywhere on the website. All forum threads, articles, etc. If a members post is good information please don't forget to tell them "Thanks" or "Like"

Rate Us On Google

Please take the time and visit our Google Review page and give us a review of our services.

Tip Jar

If Mopar1973Man.Com has helped you with quick and timely information for your repair please consider tossing a tip in the Tip Jar

×
×
  • Create New...