removing fuel sending unit

[BBHD]

I ran mine toward the rear as well for easier routing of the hose 

[wagntagn]

9 hours ago, JAG1 said:

What did you do to resupport the bed frame that is cut? Specifically the passenger side frame... I had to make a front to rear support for that.

The frame is 1 1/2" angle by 3/16"  it's pretty heavy duty once bolted to the floor it's pretty solid my tool box sits almost on top.The frame can be bolted through the cross member for added support if required.

[Royal Squire]

On April 19, 2016 at 4:21 AM, wagntagn said:

Build my own here's a few pics with mesurements

for the fuel level I'm picking up 20 0hms (empty) & 120 ohms(full) is that normal,here's pics

 

Wondering if you have distance from front and side of bed so can more easily locate opening 

[wagntagn]

Roughly 13" from back and 18" from side

The last pic is my suction hose 1'2" PVC good for diesel fuel.

[Royal Squire]

Thanks for the measurements. I may actually try this sometime when I don't have anything else to do. Really like the idea 

[wagntagn]

Yep it's a done deal easy access if any problems and I also installed a SS ball valve if I need to do any mods.