Jump to content
Mopar1973Man.Com LLC

  • Welcome To Mopar1973Man.Com LLC

    We are a privately owned support forum for the Dodge Ram Cummins Diesels. All information is free to read for everyone. To interact or ask questions you must have a subscription plan to enable all other features beyond reading. Please go over to the Subscription Page and pick out a plan that fits you best. At any time you wish to cancel the subscription please go back over to the Subscription Page and hit the Cancel button and your subscription will be stopped. All subscriptions are auto-renewing. 

just started cutting out and also dieing...

cguyfish
 Share

Recommended Posts

cguyfish

cguyfish

Posted
  • Author
Posted

Ok. I cleared and started it up. Let idle 800 rpm. ran for about 20min fine. I watched scanner temp gauge.... when it got to 153 it cut out once very quickly.5 more min  cut out again 156 and again.when it got to 162 it started to miss rapidly almost died and came back.another min and it died....Got the same codes again.stored 1690/pending 1690 /    mil / on /freeze frame 1690

Link to comment
Share on other sites
  • Owner
Mopar1973Man

Mopar1973Man

Posted
  • Owner
Posted

Where is the shop manual download for 01 5.9?  I've got to look up what all those abbreviations are

 

Main listing of error codes

http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/59-obdii-error-codes-cummins

 

The P1690 code.

http://articles.mopar1973man.com/2nd-generation-24v-dodge-cummins/59-obdii-error-codes-cummins/229-p1690-vp44-ckp-sensor-does-not-agree-with-ecm-ckp-sensor

Link to comment
Share on other sites
 Share
Go to topic listing
×
×
  • Create New...