Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

help! no power at trailer brake in-cab factory installed connector

Posted

hey guys. new here, first post. just got a new tekonsha P3 controller to tow our camper with, and this truck is new to me. I've gone over just about everything I could (I have FSM wiring diagrams of everything) and Its just not making sense, think Ive thought it over too many times. 

truck is a 2000 CTD 2500 - factory tow harness front to rear, factory hitch, factory 7 pin, and it all works fine. i have power everywhere that i should, except for the incab connector to hook up my brake controller. i've also checked the 40amp trailer tow fuse, and the fuse is good. this is where ive gotten confused, and am probably going to come off kinda dumb. theres no power at this fuse! according to the wiring diagram, this is a direct battery feed through the PDC. what am i missing?! please help!  mopar1973man, im looking to you!

  • Replies 3
  • Views 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • cloudcitybombers
    cloudcitybombers

    I dont have power at either side of that fuse, thats why I'm confused! Guess I need to unbolt the PDC and check the connector and wiring underneath there.   Thanks guys!

Featured Replies

Welcome!

 

I will have to dig in the wiring diagram and take a look at the wiring in that area.

  • Author

I dont have power at either side of that fuse, thats why I'm confused! Guess I need to unbolt the PDC and check the connector and wiring underneath there.

 

Thanks guys!

    • Like 1
    Go to topic listing

    Did This Forum Post Help You?

    Show the author some love by liking their post!

    Welcome To Mopar1973Man.Com LLC

    We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.