Jump to content

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.

Hid retrofit

Posted

Got most of my components. Just waiting on the hids. Should be here any day. @Me78569 told me I HAD to run halos though. Think we will ignore him on it this time.

 

Snapchat-1217777914_zpsxqlbxqbc.jpg
received_1307104862711461_zpswfafc5y6.jp

  • Replies 45
  • Views 8.1k
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Most Popular Posts

  • jlbayes
    jlbayes

    In. Oil is not mine.

  • beren
    beren

    I put a level on the front crossmember of my truck and jacked the axle to make it level, then you twist the projectors so the beam is perfectly level.

  • Me78569
    Me78569

    what do you know..they are dot cert  

Posted Images

Featured Replies

Did mine as well. Not sure if the ANZO housings use a different kind of adhesive, but I followed the instructions on baking them and they just did not want to budge, took about 2 hours just to get both housings covers off. Definitely a huge improvement over stock though!

20746167_1794924007191681_8889090596035130150_o.jpg

  • Owner

I'm enjoying my Morimoto D2S HID's. The only time I get a whiner that is clicking high beams at me is the little ricer cars that are low to the ground. Other than that awesome headlights. Great for all those nights coming home in the dark canyon roads.

  • Author
12 hours ago, Cronus577 said:

Did mine as well. Not sure if the ANZO housings use a different kind of adhesive, but I followed the instructions on baking them and they just did not want to budge, took about 2 hours just to get both housings covers off. Definitely a huge improvement over stock though!

 

Good to know. Did you try playing with the oven temp at all?

 

11 hours ago, Mopar1973Man said:

I'm enjoying my Morimoto D2S HID's. The only time I get a whiner that is clicking high beams at me is the little ricer cars that are low to the ground. Other than that awesome headlights. Great for all those nights coming home in the dark canyon roads.

 

Next set I want to try the D2S. 

34 minutes ago, jlbayes said:

 

Good to know. Did you try playing with the oven temp at all?

 

 I went off of the instructions at 270* for 7 minutes. I didn't want to melt anything so I didn't raise the temperature, just left them in for about 13 minutes. Was able to get it off but not as easily as most of the instructions say.

  • Author

Man it took less than 10min to soften mine up. A buddy tried to open some older housings and failed. Broke one.

Go to topic listing

Did This Forum Post Help You?

Show the author some love by liking their post!

Welcome To Mopar1973Man.Com LLC

We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features.  Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.