Two questions about fuel module

 1.        Bottom of fuel module there is a couple screen filters.  I broke mine yesterday trying to clean the module up.  With an Airdog  and 2 micron filter, do I even need to have a screen? 

 2.        If screen is not needed, can I cut off the bottom and extend draw straw to make sure  zero chance of ¼ tanks issues? 

 

Thanks

I know Eric (Vulcan Performance) says to leave the screen and red rubber piece in place. I left mine in my fuel module when I upgraded to the drawstraw 5 and I've had no issues with 1/4 problems, although I rarely let it get that low anyways.

 

With that being said, I doubt you'll have any issues with the screen being gone. I think plenty of people get rid of it anyways and I think it's one of those things where it adds extra 'filtration' from tank junk without decreasing the overall performance of the fuel module or lift pump.

 

I wouldn't extend the tube any further then was suggested with the screen in place, but that's up to you. You could always call Eric(360-263-6037) as he's a great guy to talk to about these sort of things and will get you headed in the right direction.

Edited May 24, 20178 yr by notlimah