So in my swap out to a manual, I'll need a few measurements to set my cab in the right spot (beyond where I NEED to due to body panel placement).

 

Can anyone give me a quick and dirty measurement for the shifter and transfer case selector from the rear of the BLOCK?

 

thanks!

Nv4500/241dhd.  19" to center of shift tower. 23"to center of 4x4 floor shifter recess

from block right? 

 

thanks much!  Just what I needed!

Yes I measured back from the from of the adapter plate and got a good eyeball to those measurements. 

Plus minus a hair 

Edited March 8, 20187 yr by JAG1