Jump to content
Posted

I would love to get some feedback on this if possible. Thanks to ME78569,  I am sitting hear at my truck and have done everything in the instructions for the calibration with only one hang up. I couldn't get the arduino to open when I double click the turboreset.ino. I was just wondering what I need to do to get that ino file to work. Is the ino file that same text that he has shown below the canbus library .zip? Do I need to change any values on the code itself or just copy, paste, and upload. 

All that happens right now is that when I connect power to turbo I hear it actuate immediately and I don't get any slow movement after 5 seconds. Just a quick actuation and that's it until I unhook. Reconnect and same thing. I feel like I might not have communication since I couldn't get the turboreset.ino link to work on the instructions. Could someone possibly help? I'm sitting here at my truck now trying to get communication going. Many Thanks!

  • Replies 2
  • Views 1.3k
  • Created
  • Last Reply

Top Posters In This Topic

Featured Replies

  • Author

I appreciate the response. I was told by dripley he was on travel. no big deal. It's not a deal breaker now anyway. 

It's funny I can hear the actuator working at power up though so thats good. now that I know what it sounds like I know that it's actuating on key on and on key off. now whether it's going all the way to where it's supposed to is yet to be determined. 

I do know that the canbus controller is getting the code uploaded of some sort but it's not talking to the turbo yet.