Jump to content
Posted

Over a year I bought a new set of component speakers and finally tried to install them. The tweeter doesn't fit in the stock a-pillar location, and since I can't return them I decided to mount as shown in the photo. Should've just bought the normal speakers! Live and learn...

 

KIMG0240.jpg

  • Replies 5
  • Views 1.8k
  • Created
  • Last Reply

Top Posters In This Topic

Most Popular Posts

  • The mark between 140 and 190 = 165. the mark between 190 and 240 = 215, if that helps. My scan gauge marches right along with those temps. Not hard to eyeball, 190 or 200 will still read the same exce

Posted Images

Featured Replies

  • Author

So far I like the 200 degree thermostat. I don't tow often or heavy, so it may not be for everyone. Before I covered my grill some it did seem the thermostat hunted some, but I only had my truck gauge to observe, no OBDLink at the time to show precise temp.

 

I may never go back to a lower temp as I have seen no downside for my application.

My truck gauge and my scan gauge mirror each other. They both read off of the same sensor thru the ODB connection.

  • Author

My truck gauge shows 140, 190 and something around 240.

When comparing a 190 t-stat to a 200, I could use a few more gradations!

The mark between 140 and 190 = 165. the mark between 190 and 240 = 215, if that helps. My scan gauge marches right along with those temps. Not hard to eyeball, 190 or 200 will still read the same except for yours gong 10* higher.

Edited by dripley