Posted January 29, 20196 yr If I unplug the high idle harness and plug the factory wiring into the sensors I do not get any codes, plug/hook up the high idle harness I get P0112 INTAKE AIR TEMP VOLTAGE LOW & P1693 DCT DELETEDIN COMPANION JTEC MODULE. Any ideas?
January 29, 20196 yr wehn did you get the switch? This is typically a bad switch, the last batch of switches ( the actual rotatary switch) has a higher rate of bad connections internal to them. Put a support ticket in to get it warrantied. Support@mopar1973man.com
January 29, 20196 yr Author 2 minutes ago, Me78569 said: wehn did you get the switch? This is typically a bad switch, the last batch of switches ( the actual rotatary switch) has a higher rate of bad connections internal to them. Put a support ticket in to get it warrantied. Support@mopar1973man.com Ok Ill put a ticket in, its only a monthm or 2 old thanks.
January 29, 20196 yr Yep, this is related to the switch itself. I have adjusted the testing of the switch before sending out to catch these bunk parts before they go out.
If I unplug the high idle harness and plug the factory wiring into the sensors I do not get any codes, plug/hook up the high idle harness I get P0112 INTAKE AIR TEMP VOLTAGE LOW & P1693 DCT DELETEDIN COMPANION JTEC MODULE. Any ideas?