Pristine CTD. Extra cab, short bed, 2wd, SLT. Factory tow/haul package, leather heated seats, heavy insulation package. Rebuilt HX 35/40, Dap injectors, full gauges, PacBrake, Dynamic Transmission vb/servos/accumulator/strut/band/triple disc. Soft tranny lines, 40k trans cooler, lift pump, gooseneck hitch (never used), class 5 tow hitch, tonneau cover, air bags, re- geared to 3.73’s, 3rd Gen brakes with 17" rims Rust free CA truck located in Chico CA, 100 miles north of Sacto. I built this to
-
Price: 16000
-
Location: Chico CA 95973
Hello everyone another New to me 98.5 day after I bought it odometer started blinking and no guages except for the tach. P1698… Checked for bus voltage at the dlc and have 2.45 without the truck running, I figured it was a pcm but I put it in my other 98 and it worked but the pcm out of the other truck didn’t work in this one. I checked the voltage of the 2 bus wires on C3 on the pcm and it seems they only show 0.9 volts? Truck charges and shifts fine just no guages. I also checked the C130 connector and my grounds going into the pcm. Any help would be appreciated thanks guys