Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
- Replies 2
- Views 878
- Created
- Last Reply
Featured Replies
Archived
This topic is now archived and is closed to further replies.
Did This Forum Post Help You?
Show the author some love by liking their post!
Welcome To Mopar1973Man.Com LLC
We are privately owned, with access to a professional Diesel Mechanic, who can provide additional support for Dodge Ram Cummins Diesel vehicles. Many detailed information is FREE and available to read. However, in order to interact directly with our Diesel Mechanic, Michael, by phone, via zoom, or as the web-based option, Subscription Plans are offered that will enable these and other features. Go to the Subscription Page and Select a desired plan. At any time you wish to cancel the Subscription, click Subscription Page, select the 'Cancel' button, and it will be canceled. For your convenience, all subscriptions are on auto-renewal.
My brother and myself have a workshop together where we do a lot of welding and fabrication work as well as vehicle welding and repairs.
Just done a Komatsu PC 290 excavator riddle bucket that had the entire bottom ripped out of it, cutting edge and riddle slats right back to the bucket roll, got another in on friday for 2 outer shanks to replace
Got 2 Mecedes vans to build hydraulic decks in the back to carry 5 coffins for a funeral company
A few weeks ago our 2 post lift wouldn't raise, the quadrant on the R/H screw is worn to the point that a small clip pops to stop the lift being used (safety feature) We had to use it for one job welding a camper van for MOT inspection but we made sure we had it supported as well as the lift
We bought a replacement yesterday 9000lb 4 poster MIUSA CA to be precise best thing about this is it is moveable and 240volt instead of 3 phase
To move it 4 dollies with a wheel on each is placed under the beams, put 4 pins in and then the ramp is lowered this lifts the 4 posts enabling the whole thing to be wheeled around...... genius
We bought it from a repair shop that had just spent over 50k on new lifts...... some people have more £££ than sense
Took us 2 hours to assemble yesterday afternoon, just hydraulic oil today and a test lifting my truck which is I'd say is right on the limit